green-foam

Could have been, but i doubt it, more probable is that the detector actually detected carbon monoxide. You didn't leave the windows open / ajar did you? Operate the detectors test button, if it works as described in its test manual, and does not indicate carbon monoxide again, then you have nothing to worry about.

It depends on the brand of the battery and its age. Some brands will last around 5 years some only 3 years. But which ever brand of battery you have they should be tested. If they pass the test there is no need to change them, however if they pass the test but are close to the end of their expected life it would be a good idea to change them. Obviously if they fail the test / show signs of corrosion / other defect they should be changed immediately.

Hi, could you clarify your question as you have said you have to have either CO2 or foam in place of CO2 or foam which is what you already appear to have. Dry powder is often no longer used in "confined spaces / indoors" as it reduces viability. It is often replaced by foam.

I would suggest that if your fire wardens record the fact that CO2 extinguishers have "missing" pressure gauges, you need new fire wardens. If they are getting it worng about this, what else are they getting wrong?

For the definitive answer may I suggest you ask Fike's technical dept. You can contact them at fstsupport@fike.com The general phone number is 01633 865 558

I would say Melissa is in America, so knowing the make / model will be of little use to us here in the UK. However, I would say that if any CO alarm indicates CO, it is easy to check, take the alarm outside into the open air, and wait for it to stop, then take the alarm back inside, if it starts again there is a high probabilty of CO being present

There is such a thing as a "remote hush button" https://www.youtube.com/watch?v=OOlCMA2ZOQM However, it only works in "alarm conditions" it will not silence a "low battery" alarm. I would however suggest that you ask your son to change the batteries in all the detectors every 11 months, that way they are changed a month before they go "low battery" at a silly hour of the day.

It would depend on what the doors are for and what your access control system does, you do not say.

It will be an electro magnet. You just need to remove either of the wires from it and isolate said wire. Another easier option would be to remove the "Device" that the electromagnet holds onto.

And your question is? and you are what? in relation to the fire alarm

I would say yes, PROVIDING you have mains powered but radio interlinked smoke alarms, safelincs can supply them Click here The idea of them being mains powered is so that you can not take the battery out, thereby stop the smoke alarm from working. I feel I should also point out that safelincs can supply mains interlinked smoke alams too which work out at around 1/3 of the cost of a mains radio linked smoke alarm. Click here

Either they will or they won't, so chances are 50 / 50

I would suggest you do not mark the floor, since some one could put boxes or similar around the markings, so that they have complied with your "keep the painted box clear" rule but still block the route to the fire exit.

Are you sure you are not meaning the battery in the fire alarm panel? Fire alarm panels should work for 20+ years, if well maintained. (I have seen panels that are older than this still working) But the batteries in the fire alarm panels should be changed as and when required which is usually a 5 year maximum.

Tom, Fabric radiator covers really are covers for radiators made from fabric. Available in lots of fabrics and some can have photos printed on them. The idea is so that small people do not burn themsleves on the radiator. Personlally I would just turn it down.

I am sorry, but I can't but think that Rick, has "sorted it" by now as he asked way back in February

I can understand that you are trying to resolve the problem, but as I first said It could be any of 507 possabilites all of which can not be "diagnosed" via a forum

Since you have said paint, and I don't, what do the instructions on the tin say?

I would say without seeing it, all any one can do is guess, you really should have it looked at by a fire alarm engineer. Why not call the company who maintain your fire alarm?

Have you considered a "water mist" fire extinguisher? Yes, they use de-ionised water and are safe on live electrical equipment up to 35KV Safelincs supply them CLICK HERE

Firebug ceased the supply of fire extinguishers in the UK as of September 16th 2014 (Although later, they did sell off what they had left at a reduced price)

What do you mean by multiple issues? It may be a case of the detectors are old (you do not say) wrongly sited or just never maintained.

Without knowing what wiring you actually have and its condition I would say its not possible to give a precise answer. I can only suggest you contact another fire alarm company and ask them to visit and give their opinion.

What was the colour of the LED before you noticed it is red? Do you have any other fittings with "SEC/M3/8F" on them, if so what colour are their LED's I have no idea what "SEC/M3/8F" is, and google shows nothing, does the light have anything else on it?