Steve Blakemore Posted November 30, 2020 Report Share Posted November 30, 2020 Not sure if I posted this as a guest by mistake. Are batwing type seals acceptable as smoke seals. I have been told by one seal company they were hot gas tested not cold smoke tested and I am finding them used a lot in housing associations in some cases as well as brushes on composite doors. Please help are they acceptable as smoke seals. Thanks Quote Link to comment Share on other sites More sharing options...
Neil ashdown Posted November 30, 2020 Report Share Posted November 30, 2020 https://www.lorientuk.com/products/single-batwing Data sheet available, follow the link and contact the manufacturer as necessary. Quote Link to comment Share on other sites More sharing options...
Steve Blakemore Posted November 30, 2020 Author Report Share Posted November 30, 2020 Thanks Quote Link to comment Share on other sites More sharing options...
Neil ashdown Posted December 2, 2020 Report Share Posted December 2, 2020 There's this one too https://www.lorientuk.com/products/batwing Quote Link to comment Share on other sites More sharing options...
Steve Blakemore Posted December 6, 2020 Author Report Share Posted December 6, 2020 Thats exactly the ones i have been seeing. Thankyou Neil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.