Jump to content

Rahel Lock

Administrators
 View Profile  See their activity

  • Posts

    24

  • Joined

  • Last visited

 Content Type 

Posts posted by Rahel Lock

  1. Replacement of Deta 1111

    in Smoke Alarms

    Posted

    Hi Jo

    we haven't had any feedback from customers yet using the SBBRKSM on the old DETA1111 bases. Sadly, for us there is no way of testing this. The new units were designed to fit on the BRK baseplates but the older units had different wiring and may not be compatible.

    thanks
    Rahel

  2. 660MBX

    in Smoke Alarms

    Posted

    Hi Rob

    you can replace your BRK670MBX with our Easychange SBBRKSM smoke alarms. 

    In our testing there don't appear to be any issues when mixing the old BRK670MBX units with our SBBRKSM, but we can't guarantee that it will work reliably with a larger system or over long periods of time. Therefore we would recommend that you replace all 7 of your units at the same time. 

    I hope this helps

    Rahel

  3. Replacement of Deta 1111

    in Smoke Alarms

    Posted

    Good morning Gareth

    thank you very much for your question. The easichange SBBRKSM alarm is a new unit we developed specifically so it can be used on the 660MBX and 670MBX baseplates. 

    Like you say logically they should also fit your DETA1111 alarms but we have not tested this and therefore cannot guarantee it will work. 

    thanks
    Rahel

  4. 660MBX

    in Smoke Alarms

    Posted

    Good morning

    the SBBRKSM alarms will fit your 660MBX push fit bases however the colour of the SBBRKSM doesn't quite match your unit. Additionally the 660MBX push fit base is already a deep base which will in combination with the SBBRKSM alarm result in a bulky unit. So you can use the replacement but it might not be aesthetically pleasing.

    I hope this helps.
    Rahel

  10. Fire doors

    in HMO

    Posted

    Hello 

    thank you for your post. Please find the answers to your questions from our fire door team below.

    1. As you have already had an inspection and you’re aware that certain elements are missing, a further inspection would only confirm the information so you’d be spending out on something it doesn’t sound like you need. It may be worth having the additional work carried out and asking your previous company to carry out a further inspection, particularly as they’ve said they’ll certify the work.

    2. Safelincs will not certify remedial works or any installation not carried out by our installers but we obviously can’t comment on other companies’ processes and procedures.

    3. It depends on the gap; packing strips and foam can be used up to 25mm but anything larger would need to be filled with fire-rated cement/mortar. Architrave must be fitted with packing strips and foam.

    Thanks
    Rahel

  12. Hispec RF alarm red light

    in Smoke Alarms

    Posted

    Hi Richard
    You could perform a reset and reconnection of the system to see if this solves the issue. To reset all your alarms press the black pairing button five times, until the red LED on the front flashes ten times. The pacing/speed at which you press the button is important - too fast or slow and it often won't work. So it can take a few attempts to get it right. Once all units have been reset perform a reconnection.
    Failing this I'd advise to get the unit swapped out. 
    Thanks
    Rahel

  14. What type(s) of fire extinguisher should I buy?

    in Fire Prevention

    Posted

    Hi Michael

    The best solution for home owners & flats would be water mist extinguishers. These extinguisher are safe to use & effective for most common types of fires (A, B, C and F) and are also safe to use on electrical equipment. Water Mist extinguishers are also 100% non-harmful and clean to use.
    They discharge microscopic water droplets which reduces the oxygen content (required for combustion) around the fire, extinguishes the flames and creates a highly effective cooling blanket on the hot fuel, preventing re-ignition. Safelincs has a range of water mist extinguishers here.

    I hope this helps.
    Rahel

  16. Mr

    in Smoke Alarms

    Posted

    Hi Tom

    Could you clarify if it is the smoke alarm that is flashing or the base? If the flashing light comes from the base this would indicate that the cell batteries are depleted and need to be recharged. This could be the case if your smoke alarm has been disconnected from mains power and starts using the power from the batteries.

    Here is a copy of the EI168RC manual which explains the issue in a bit more detail on page 7 and 8: https://www.safelincs.co.uk/templates_safelincs/files/datasheets/540_Ei168RC-User-Manual.pdf

    thanks
    Rahel

  17. Can I test my own emergency lighting?

    in Emergency Lighting

    Posted

    This is what the The Regulatory Reform (Fire Safety) Order 2005 states about the "responsible person":

    Meaning of “responsible person”

    3.  In this Order “responsible person” means—

    (a)in relation to a workplace, the employer, if the workplace is to any extent under his control;

    (b)in relation to any premises not falling within paragraph (a)
    - the person who has control of the premises (as occupier or otherwise) in connection with the carrying on by him of a trade, business or other undertaking (for profit or not); or
    - the owner, where the person in control of the premises does not have control in connection with the carrying on by that person of a trade, business or other undertaking.

    Please see Anthony's reply for your other questions.

  19. How do I know if my CO alarm went off because of Carbon Monoxide?

    in Carbon Monoxide Alarms

    Posted

    Good morning
    it will be a little late for immediate advice at this point but for future reference it is important to find out if it is your smoke or your co alarm that has gone off. I'd advise to test both units to familiarise yourself with the sound of both units.
    Smoke alarms can false alarms if contamination in the smoke chamber (dust, small insects etc) occurs but co alarms normally don't false alarm.

    Follow these steps if alarm sounds:
    1. Keep calm. Open all doors and windows. Turn off all fuel-burning appliances if possible.
    Note: Outdoor conditions could influence domestic CO alarms (bad traffic
    pollution in cold weather, for example). In these circumstances, the level of indoor CO might
    actually increase when doors and windows are opened.
    2. If alarm continues to sound, even after being reset (where appropriate), evacuate the
    premises, alerting other occupants to the risk. Leave doors and windows open. Do not re-enter premises.
    3. Get medical help for anyone suffering the effects of CO poisoning, and advise that CO inhalation
    is suspected.
    4. Call Gas Emergency Services: 0800 111 999, or your local Gas Safe Registered Engineer.

×
×
  • Create New...