September 25, 20169 yr comment_9298 My Ei141RC blips every 2-3 seconds. Nothing in the manual states what could be the problem witha short interval like that. Mains supply is good (green light). Changed battery, still Blips. Replaced with brand new unit, same happens again as soon as I slot it in. Please note, it's not the Allarm-Sound like long Beeps, but rather just a short Blip. Report
September 26, 20169 yr comment_9301 Hi Steven As you have changed the Alarm it sound like there’s an issue with the cable or power supply. Was the Base plate changed as well? I have attached a couple Of Technical Bulletin which may help If nothing else helps, please ring Tel: 01691 664100 Harry No.19e Power supplies for Grade D alarms - IEE Regulations.pdf No.21a Wiring Smoke Heat Alarms - Alternative Energy Sources.pdf Report
September 27, 20169 yr comment_9306 No, I haven't changed the Base-Plate. Nothing has changed there and as I mentioned, the green (power) light is constant when I slide the alarm in. I have also measured the voltage on the Base-Plate, and all OK at 248V. Report
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.