January 15, 20242 yr comment_40633 Hi. Advice needed please. New intumescent strips fitted recently are not sticking. Can I use an adhesive? If so can anyone recommend one? Thanks in advance. Report
January 15, 20242 yr comment_40645 If you use adhesive it will make it difficult to take them out if necessary. Instead you could you short panel pins to hold them in place. Report
January 17, 20242 yr comment_40683 Thank yo for your reply Neil. Is there a specific brand of pins you would recommend? Report
January 18, 20242 yr comment_40706 No but assuming the door/frame is timber, stainless steel would be best. Before you go ahead make sure the groove for the seals is clean and consistently of the right depth and width to match the seals. Report
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.