Steve123
-
Posts
4 -
Joined
-
Last visited
Posts posted by Steve123
-
-
That is something I would take up with our customer. Potentially a major refurb is going to happen so it wouldn’t be out of the question to suggest these. I will make enquiries with the manufacturer in regard to their test evidence. Thanks very much for the help.
-
-
I have a set of double leaf fire doors. Both doors have an automatic door bottom seal that is dropped when the button is pressed when it hits the rebate. All gaps between the door and floor are filled except a 15x6mm gap where the 2 stop so the doors can close properly. Is this acceptable or should there be another piece of equipment fitted to cover this small opening? Many thanks. Unable to upload photo due to file size.
Small gap between door bottom seals.
in Fire Doors and Accessories
Posted
I have spoken with the manufacturer who said they are no longer covered by their certifire certificate. The seals are as far as I can tell lorient LAS8009 si. Kind of leaves me without much information to go on. I’ve also had issues tracing a certifire cert of CF658, I’ve tried calling and emailing certifire, the manufacturer of the door has said they didn’t manufacture the door which was a strange one ?. Leaving what appears to be a host of doorsets with no test evidence/data to hand over to the customer.