Jump to content

Stand Alone Call Points


Frank
 Share

Recommended Posts

When are stand alone battery operated manual call points acceptable? Can they be incorporated into an existing alarm system? Are they suitable for office buildings or medium sized buildings used for engineering/fabrication?

Any advice is much appreciated.

 

 

Link to comment
Share on other sites

Stand-alone battery operated call points were designed to be used on building sites, if it is a very small premises you could use one, but equally you could raise the alarm verbally.

Stand-alone alarms can be linked to each other if they are the same brand, but not linked to an existing hard wired fire alarm as they are not compatible. What does the fire risk assessment say?

Link to comment
Share on other sites

They are for temporary/site use. Systems in buildings are required by the Health & Safety (Safety Signs & Signals) Regulations 1996 to have two sources of power and a fire alarm system to BS5839-1 is required where the control panel, connected to the mains, powers the system on 24V and has batteries to back up the system if the power fails.

Small single storey premises where a shout could be clearly heard throughout do not need an electrical fire alarm system unless their layout presents a need (e.g. inner room situation) and you could in theory use a stand alone here as more effective than a shout with verbal warning being a back up if it fails.

You can link some standby alarms, but the installation would be non compliant in many ways if not a temporary site.

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...