Jump to content
Guest Gerry

Fire door gaps

Recommended Posts

The gap between the door frame and the door leaf on both sides/top of the door is 3mm +/- 1mm, this also applies in the area of the lock. The gap at the threshold of the door should be 3mm or a smoke seal fitted as well as the sides and top. 

Check out ASDMA Best Practice Guide

Share this post


Link to post
Share on other sites
Guest Laurie

I need to fit a fire door to a 1st floor flat. As normal, the door opens inwards but because the inside floor is not level, the bottom of the existing door has been shaved at an angle to allow the door to open fully. This means there is a 7mm. gap on one side when the door is closed. It is a major operation to level the floor. Is there another solution?

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...