Jump to content
Guest Shawntre

How to change the passcode on Phoenix 1262

Recommended Posts

Guest Shawntre

I need to reset the electronic passcode for the Phoenix Centurion 1262 fireproof safe, as a member of staff saw me using the passcode today. Can anybody help?

Share this post


Link to post
Share on other sites

To change the code you should follow the instructions below:


1. Press button C
2. Enter the current passcode (this may be the factory default 1,2,3,4 or a previously set user code of 4-16 digits)
3. Press button # (a melody will sound to confirm your code)
4. Turn the knob to open the lock
5. With the lock open, press the # button
6. Enter the code from step 2 (the default factory code 1,2,3,4 or previously set user code)
7. Press the # button
8. Enter a new 4-16 digit code
9. Press the # button.

Your code is now set to the one entered in step 8


Share this post


Link to post
Share on other sites

If you do not have the present code you will not be able to change but you could contact the manufacturer and see if they can help, there may be a way to reset to factory code.

Share this post


Link to post
Share on other sites
Guest bob

Hi

I have just bought a Phoenix Data Combi DS2503E from the local tip with a broken handle and they said the code was 2016 and they unlocked it before I took it . I have it home and now it will not open is there a delay on it or something im doing wrong

thanks

Share this post


Link to post
Share on other sites

Hi Bob

you need to make sure that the batteries are replaced in the front cover should they be low. Here also the lock instructions for the Phoenix Data Combi fire safe. If the standard factory code shown does not work you will need to get an original invoice to prove ownership to Phoenix before they issue a master code which is probably not possible in your case.

Harry

Share this post


Link to post
Share on other sites
Guest Maxine

Hi I've just started a new job and need to change the office safe combination. We have a Phoenix Fire Fighter 0421, can anyone please give me instructions. Thanks

Share this post


Link to post
Share on other sites

Hi

TO SET THE PERSONAL CODE

1. Press the # button.
2. Press the green code change button located on the back of the safe door
3. Enter your personal 3 to 6 digit code and press # button to set.
4. The lock will emit a tone and the LCD will display IN. to confirm the new code.
5. To change the code follow the same procedure with the door and lock in the open position.

This lock can be programmed with an 8 digit master code;
which cannot be removed, but can be edited. Consider carefully
if you require this function before entering a second code.

 

TO SET THE MASTER CODE

1. Press the # button
2. Enter 0,0
3. Press the green code change button.
4. Enter the selected 8 digit master code.
5. The lock will emit a tone and the LCD will display IN. to confirm the master code.

test before you close the door

 

Harry

Share this post


Link to post
Share on other sites

Your content will need to be approved by a moderator

Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×